Skip to content
Palinoia Diagnostics

Search Palinoia

Browse all test kits
Back to the aquarium kit

The Palinoia guide

Understanding
your results.

Your 8-in-1 aquarium strip: what each reading can tell you, what can affect it, and how to keep track.

The Palinoia aquarium bottle label, with the 7-in-1 and ammonia instructions and the color chart for all eight parameters

Eight readings. One useful starting point.

Your Palinoia 8-in-1 strip checks eight features of your aquarium water. Each pad has its own row on the color chart printed on the bottle label. Together, the readings help you notice how your tank changes over time.

Read every pad against its own row. Seven pads share one quick dip; the eighth, ammonia, has a separate test. The chart’s green OK and red Water Change bands, and its ammonia labels, give each reading context.

What each pad checks

Pads 1–7 sit at the tip of the strip; pad 8, ammonia, sits apart near the handle end. Each name below opens its own guide to the parameter and its chart levels.

Nitrate

A by-product of fish waste and uneaten food breaking down.

Nitrite

A by-product of the nitrogen cycle that is extremely toxic to fish.

Free chlorine

A tap-water disinfectant that can harm fish and beneficial bacteria.

Total hardness (GH)

Dissolved calcium and magnesium in the water.

Total alkalinity (TA)

The water’s ability to resist changes in pH.

Carbonate (KH)

The water’s carbonate and bicarbonate buffering capacity.

pH

How acidic or alkaline the water is, with freshwater and saltwater chart rows.

Ammonia nitrogen

The most toxic form of waste in the aquarium, tested on its own.

Explore the interactive strip

A careful reading starts with dry hands.

Use the instructions and color chart supplied with your kit. The colors on this website explain the scale; the chart on your bottle label is the reference for testing.

  1. Dry your hands and choose a spot with natural daylight. Hold the strip by its short blank end, beyond the ammonia pad, and avoid touching the test pads.
  2. Dip pads 1–7 into the aquarium water for 2 seconds, then remove the strip.
  3. Do not shake off the excess water. Hold the strip level while the colors develop.
  4. Read all results except Nitrate and Nitrite at 15 seconds. Read Nitrate and Nitrite at 60 seconds.
  5. For ammonia, immerse only pad 8 and move it up and down 30 times, about one second per dip. Then compare the ammonia pad with the chart immediately.
  6. Close the cap immediately after taking out a strip, and close it tightly after each use.

Use the color chart printed on your bottle label. Screen colors and the dry pads pictured online are not a reference for reading a sample.

Reading accuracy & limitations

Timing, light and handling all affect what you see. The instruction card lists six key steps:

  • Do not touch the test pads. Oils, dirt or moisture on your fingers can affect results.
  • Do not handle strips with wet hands. Moisture can start a reaction before testing.
  • Keep moisture out of the bottle. Close the cap immediately after taking out a strip.
  • Close the cap tightly after each use. This protects the strips from humidity and air exposure.
  • Read results in natural daylight. Artificial light may change how colors appear.
  • Do not remove the desiccant. It keeps the strips dry and effective.

Store the bottle in a cool, dry place, away from direct sunlight and extreme heat, and use the strips within 90 days after opening. A visual color match estimates a level on the chart; it is not a precise laboratory measurement. The strips are a screening tool, and results depend on reading conditions.

Keep the result in context.

A strip reading describes the water you tested at that moment. It cannot tell you why a level has changed, and it is a screening reading, not a laboratory water analysis.

The chart’s bands and the card’s ideal ranges are general references, and the card notes that ranges may vary depending on the type of fish and plants in your aquarium. For pH, the chart’s freshwater OK band, which covers the 6.8 and 7.2 blocks, is narrower than the card’s 6.5–8.5 range, and the saltwater row marks only 7.8 as OK.

Turn readings into a routine.

Record the date, the time, your aquarium’s water type, and each pad’s value and band. Compare them with earlier tests, because a trend is easier to see than a single result.

Where a reading falls in the chart’s red Water Change band, the chart marks that level for a water change. Retest any surprising reading with a fresh strip. The card’s ideal for nitrite, free chlorine and ammonia is 0 ppm.

Sources & further reading

Descriptions follow the kit’s instruction card; chart levels, bands and reading times follow the bottle label. Ranges may vary depending on the type of fish and plants in your aquarium.

Back to the aquarium kit