pH strips are read by color, so small details change what you see: when you test, how you collect the sample, and the light you read it in.
This checklist follows the bottle label and instruction card for the Palinoia 150-count pH strips, for saliva and urine.
Before you start
Keep your hands dry and take out one strip by its long blank handle, never by the pads. Replace the cap immediately, and leave the desiccant inside the bottle.
Choose a spot with natural light and keep the bottle, with its color chart, within reach. Never put a strip in your mouth; the strips are for external use only.
Testing saliva
Test first thing in the morning, or at least 2 hours after eating, drinking or brushing your teeth. The label suggests filling your mouth with saliva and swallowing once, then collecting fresh saliva onto a clean spoon.
Use non-bubbly saliva, which the card says gives the best results. Dip both pads for 2 seconds, remove the strip and lay it on absorbent material.
Testing urine
Use the second urination of the morning, or test about two hours after eating. Collect a midstream sample in a clean, dry container and dip both pads for 2 seconds. The label also describes holding the strip in the midstream for 2 seconds.
Gently shake off excess liquid or tap the strip on a tissue. Excess urine can run between the pads, so hold the strip horizontally while you compare.
Read at 15 seconds
Wait 15 seconds, then match both pads to the chart on the bottle label. If the colors fall between two shades, choose the closest; each pad shows a range of about 0.25–0.5.
If medicine, salt or alcohol may be affecting your results, the card says to rely on the top pad, farthest from the handle. Use each strip once and discard it.
Sources & further reading
- Palinoia pH strips instruction card
- Palinoia pH bottle label and color chart
- Understanding your pH results: accuracy and limitations
This article is educational. Follow the instructions supplied with your kit. The strips are for personal wellness and are not intended for diagnosing or monitoring medical conditions.
Keep reading
Keep a simple log of your pH readings