150 pH test strips (100 + 50 free) in a white bottle with the color chart on its label, plus an instruction card. The packaging reads SALIVA / URINE.
Saliva and urine +
Test either sample with the same strips: saliva collected on a clean spoon or in a cup, or a midstream urine sample in a clean, dry container. Readings can vary between saliva and urine, so compare like with like.
For personal wellness +
For external use only. Designed for checking saliva and urine pH as part of a personal wellness routine; not intended for diagnosing or monitoring medical conditions.
Saliva or urine. Three simple steps.
Test saliva or urine. Both use the same 15-second read and the chart on the bottle label.
Step 01
Collect saliva or urine, then dip.
Saliva: first thing in the morning, or at least 2 hours after eating, drinking or brushing, on a clean spoon or in a cup. Never put the strip in your mouth. Urine: the second urination of the morning, midstream, in a clean, dry cup. Dip both pads for 2 seconds.
Step 02
Wait 15 seconds.
Remove the strip and lay it on absorbent material for 15 seconds. For urine, gently shake off excess liquid or tap the strip on a tissue first.
Step 03
Compare both pads.
In natural light, match both pads to the chart on the bottle label and choose the closest shade. For urine, hold the strip horizontally so excess liquid does not run between the pads.
These short clips demonstrate the sequence. Hold the strip by its long blank handle, never by the pads. Follow the instructions and color chart supplied with your kit. View the instruction card (PDF)
Explore your results.
Two color pads, a 14-step chart, and separate result ranges for saliva and urine. Select a pad to see what each color can tell you.
Select a pad belowClickTap either pad to see its chart row.
TipHandle
Both pads sit at the tip. Hold the long blank handle, never the pads.
Sample
What it shows
Keep in mind
Your next step
About this guidance
Chart levels follow the color chart on this kit’s bottle label. The saliva and urine ranges follow the kit’s instruction card, paraphrased for personal wellness:
On-screen colors are illustrative. Compare both pads with the chart on the bottle label at 15 seconds, in natural light. If the colors fall between two shades, choose the closest; each pad shows a range of about 0.25–0.5. For personal wellness only: the strips are not intended for diagnosing or monitoring medical conditions.
A closer look at your test strip.
Two color pads at the tip and a long blank handle. Learn how each sample is tested, then compare both pads with the chart on the bottle.
What it checks Your kit at a glance
In the bottle
150 test strips (100 + 50 free)
On each strip
Two color pads at the tip, then a long blank handle
Also included
Color chart on the bottle label, and an instruction card
Samples
Saliva on a clean spoon or in a cup, or a midstream urine sample in a clean, dry container
Dip time
2 seconds
Read time
15 seconds, against the chart on the bottle label
Range
pH 4.5–9.0, in 14 chart steps
Store in a cool, dry place (2–30°C), away from sunlight, moisture and heat. Replace the cap immediately after taking out a strip, keep the desiccant inside, and use each strip once. Use the strips before the expiry date or within 90 days.
Reading accuracy & limitations
Read at 15 seconds, in natural light. Keep your hands dry, hold the strip by its handle and never touch the pads. If the colors fall between two shades, choose the closest; each pad shows a range of about 0.25–0.5. For urine, hold the strip horizontally while comparing, because excess urine can run between the pads.
Medicine, salt or alcohol can affect results; in that case, rely on the top pad, farthest from the handle. The strips are for personal wellness and are not for water testing. They are not intended for diagnosing or monitoring medical conditions.
Can I test saliva and urine with the same strips?+
Yes. Every strip has two color pads, and the instruction card covers both samples: saliva collected on a clean spoon or in a cup, or a midstream urine sample in a clean, dry container. Readings can vary between saliva and urine, so compare saliva results with saliva results, and urine with urine. See both methods
When should I read the strip?+
Wait 15 seconds after dipping, then compare both pads with the chart on the bottle label in natural light. If the colors fall between two shades, choose the closest.
Why are there two pads?+
The strips use a double color pad: the top pad matches the chart’s top row and the lower pad matches its bottom row. Compare both. If medicine, salt or alcohol may be affecting your results, the instruction card says to rely on the top pad, farthest from the handle, which it calls more stable. Explore both pads
What is the best time to test?+
For saliva, test first thing in the morning or at least 2 hours after eating, drinking or brushing your teeth, and use non-bubbly saliva. For urine, test the second urination of the morning or about two hours after eating. Testing at a consistent time makes your readings easier to compare.
What do the results mean?+
The instruction card gives separate ranges for saliva and urine, from Very acidic to Too alkaline, with an Optimal range of 6.75–7.25 for saliva and 7.0–7.5 for urine. The strips are for personal wellness and are not intended for diagnosing or monitoring medical conditions; talk to a healthcare professional about readings that concern you. Understanding your results
How do I avoid a misleading reading?+
Keep your hands dry, hold the strip by its handle and never touch the pads. Never put a strip in your mouth: collect saliva on a spoon or in a cup instead. Use fresh samples, compare the colors in natural light, and use each strip once. Read the accuracy guide
How should I store the bottle?+
Store it in a cool, dry place (2–30°C), away from sunlight, heat and moisture. Replace the cap immediately after taking out a strip, keep the desiccant inside, and use the strips before the expiry date or within 90 days. View the instruction card
Can I use these strips to test water?+
No. The instruction card says the strips are not for water testing. They are designed for checking saliva and urine pH.