Skip to content
Palinoia Diagnostics

Search Palinoia

Browse all test kits

The Palinoia guide

Tin / Nickel strip · chart row 1 of 2

Tin in drinking water.

What the Tin / Nickel strip shows for tin, a parameter with no current federal drinking-water MCL.

TinChart row 1 of 2Illustration as drawn on the pouch label: pads at the top, level with the chart rows. The label names the rows, not the pads.

What the kit’s guide says

“May come from metal plumbing or coatings; higher levels can affect taste and comfort.”

Palinoia Water Quality Reference Guide · Know your 24 water parameters · Metals & trace elements, 8 of 24

The EPA reference value

The kit’s reference guide lists “Tin” under “Additional Commonly Monitored Screening Parameters”: No current federal drinking-water standard.

The pouch label prints beside the row: “No current federal drinking-water MCL.”

In the key printed on the kit’s record log, MCL means Maximum Contaminant Level.

The reference guide uses mg/L; the charts use ppm (and ppb for lead). In water, 1 ppm is about 1 mg/L. An EPA value is a reference for comparison, not a verdict on one home reading.

Common sources

The reference guide’s “Common Source” column lists: metal plumbing, coatings, or industrial sources.

What the guide notes

In its “Potential Health Effects” column, the reference guide notes: “Higher levels may affect taste and may cause digestive upset.”

This is general background from the printed guide. A home screening result cannot show an effect on health, or rule one out.

On your Palinoia chart

These levels follow the chart printed on the 2-in-1 Tin / Nickel strip pouch label. Values are in ppm.

0 ppm10 ppm25 ppm50 ppm100 ppm250 ppm500 ppm

This row has no OK mark on its chart.

The tin row has no OK bracket. The label prints “No current federal drinking-water MCL.” beside it and, along the bottom, “Screening reference only — no current EPA MCL for these parameters.”

The printed 2-in-1 Tin / Nickel strip pouch label, with its directions and color chart
As printed on the pouch label. Screen colors vary; use the label in your kit.

Read the pad after 15 seconds, against the chart on the pouch label. On-screen colors are illustrative and should not be used to read a sample.

Reading this pad

Tin shares its strip with Nickel. Their pouch label gives four directions:

  1. Dip the strip into water for 2 seconds and remove it.
  2. Hold the strip flat. Do not shake off excess water.
  3. Allow the colors to develop for 15 seconds.
  4. Read each pad against the square color blocks on the pouch label.

The pouch label prints no latest reading time; read when the development time is up.

Sources & further reading

Chart levels, OK marks and timing follow the pouch label; descriptions and EPA values follow the kit’s printed reference guide. These tests are for screening only. Confirm concerning results with a certified lab.