Twenty-four readings. Six tests.
Your Palinoia 24-in-1 kit checks home drinking water with six separate tests: the 16-in-1 strip, four specialty strips and an E. coli and total coliform bacteria jar. Each test has its own label, its own chart and its own timing.
Read every pad against its own row on its own label. Together, the 24 readings give you a screening picture of one water source on one day, useful for spotting changes and for deciding what to confirm with a certified lab. They are not a lab analysis.
What each test checks
Grouped by kit component, in the order of the charts. The descriptions are quoted from the kit’s printed reference guide; each name opens its own guide.
16-in-1 strip · chart on the bottle label
“Measures calcium and magnesium; Contributes to scale buildup and reduces soap lathering.” Read within 60 seconds.
“Active chlorine used to disinfect water; high levels can affect taste and comfort.” Read within 60 seconds.
“Common in groundwater; can cause staining of fixtures and affect taste.” Read within 60 seconds.
“May enter water from natural deposits, industrial discharge, landfill runoff, or improper disposal.” Read within 60 seconds.
“Includes free and combined chlorine; helps show disinfection levels throughout the system.” Read within 60 seconds.
“Enters from plumbing materials; high levels may affect taste and cause digestive discomfort.” Read within 60 seconds.
“Can leach from older plumbing materials; long-term exposure is especially concerning for children.” Read within 60 seconds.
“Occurs from natural minerals or galvanized materials; elevated levels can lead to a metallic taste.” Read within 60 seconds.
“Naturally occurring in groundwater; may stain fixtures and affect laundry.” Read within 60 seconds.
“Residues from quaternary ammonium disinfectants used in cleaning or sanitation.” Read within 60 seconds.
“May occur naturally or be added during water treatment; excess exposure may contribute to tooth discoloration and bone-related concerns.” Read within 60 seconds.
“Increases salinity; can affect taste and may impact sodium intake.” Read within 60 seconds.
“Produces a rotten-egg odor; higher concentrations can be unpleasant.” Read within 60 seconds.
“Shows water’s buffering capacity, helps stabilize pH and reduce corrosiveness.” Read within 60 seconds.
“Supports alkalinity and pH balance; important for maintaining stable water chemistry.” Read within 60 seconds.
“Indicates how acidic or alkaline your water is; EPA secondary guidance is generally 6.5–8.5; neutral water is around 7.” Read within 60 seconds.
Nitrate / Nitrite strip · pouch label
“May indicate runoff or septic influence; high levels are a concern for infants.” Read after 60 seconds.
“Can indicate contamination from fertilizer runoff, wastewater, or animal waste; elevated levels are especially concerning for infants.” Read after 60 seconds.
Tin / Nickel strip · pouch label
“May come from metal plumbing or coatings; higher levels can affect taste and comfort.” Read after 15 seconds.
“Can enter water from corrosion or industrial sources; elevated levels may be undesirable.” Read after 15 seconds.
Sulfate strip · pouch label
“Naturally occurring or influenced by wastewater, runoff, or mineral deposits.” Read after 120 seconds.
Aluminum / Chromium strip · pouch label
“Naturally present or from treatment residues; may contribute to cloudy water or staining.” Read after 15 seconds.
“Can originate from industrial sources or natural deposits; high levels may be a concern.” Read after 15 seconds.
Bacteria jar · jar label
“Signals potential microbial contamination; water may not be safe to drink.” Read after 48 hours.
A careful reading starts with the sample.
Collect a clean water sample, keep your fingers dry and work in natural light. Hold each strip by its handle and avoid touching the pads. For the 16-in-1 strip, the bottle label’s directions are:
- Dip the strip in the water for 2 seconds, then remove it.
- Hold the strip flat. Do not shake off excess water.
- Compare the pads with the chart on the bottle label straight away, and read within 60 seconds.
- Hold the strip with its handle at the top, as the arrow beside the chart shows: “HOLD STRIP BY THIS HANDLE END.” Each pad then sits beside its own row, from Total Hardness next to the handle to pH at the tip.
If a pad falls between two blocks, the label says to estimate the result between those values. Record the closest block, and note anything in between.
The specialty strips are read the same way against the charts on their pouch labels, each after its own development time. Their labels name the chart rows rather than the pads; the pouch drawings show the strip upright beside the chart, pads at the top, level with the rows.
Use the charts printed on the labels in your kit. Screen colors are not a reference for reading a sample.
Each test has its own clock.
The timing is printed on each label. The specialty labels give a development time but no latest reading time, so read each strip as soon as its time is up.
- 16-in-1 strip
- Dip 2 seconds, hold flat, compare immediately: read within 60 seconds
- Nitrate / Nitrite
- Dip 2 seconds, hold flat, let the colors develop for 60 seconds
- Tin / Nickel
- Dip 2 seconds, hold flat, let the colors develop for 15 seconds
- Sulfate
- Dip 5 seconds, gently shake off the excess, wait 120 seconds
- Aluminum / Chromium
- Dip 2 seconds, hold flat, let the colors develop for 15 seconds
- Bacteria jar
- Fill to the shoulder, cap and shake for 20 seconds, keep upright 48 hours at 68–90 °F (20–32 °C)
Only the sulfate strip is shaken; the other four strip labels say not to shake off excess water.
What the OK marks mean.
The bottle label defines its marks in its own words: “OK = typical comparison range for quick screening. Reference ranges may be based on EPA standards/guidelines where available.” The bottle chart draws a green OK bar under some blocks of fifteen of its sixteen rows; Total Hardness has the words Soft, Hard and Very Hard instead. On the pouch labels, Nitrate/Nitrite, Sulfate and Aluminum/Chromium print OK brackets; the Tin/Nickel label prints none.
An OK mark is a printed comparison, not a drinking-water safety verdict. Some OK marks include a block that equals the EPA value in the kit’s reference guide (Nitrate 10, Nitrite 1, Mercury 0.002, Zinc 5 and Sulfate 250), and two reach past the guide’s values: the Manganese bar covers 0.1 ppm against a 0.05 mg/L guideline, and the pH bar starts at 6.4 against 6.5–8.5 guidance.
The explorer on the product page outlines the same blocks the print marks, so you can see where each reading sits.
The reference guide’s EPA values
The kit’s printed reference guide lists an EPA standard or reference note for every parameter, grouped as EPA primary and disinfectant values, EPA secondary (aesthetic and operational) guidelines, and additional screening parameters with no current federal drinking-water standard.
| Parameter | OK mark on the chart | Reference guide (EPA standard / note) |
|---|---|---|
| Total Hardness | Soft · Hard · Very Hard (no OK bar) | No current federal drinking-water standard |
| Free Chlorine | 0 to 3 ppm | MRDL: 4.0 mg/L |
| Iron | 0 ppm only | 0.3 mg/L |
| Mercury | 0 to 0.002 ppm | 0.002 mg/L |
| Total Chlorine | 0 to 3 ppm | MRDL: 4.0 mg/L |
| Copper | 0 to 1 ppm | Action Level: 1.3 mg/L |
| Lead | 0 ppb only | Action Level: 0.010 mg/L |
| Zinc | 0 to 5 ppm | 5 mg/L |
| Manganese | 0 to 0.1 ppm | 0.05 mg/L |
| QAC | 0 ppm only | No current federal drinking-water standard |
| Fluoride | 0 ppm only | 4.0 mg/L MCL; 2.0 mg/L secondary guidance |
| Chloride | 0 to 150 ppm | SMCL: 250 mg/L |
| Hydrogen Sulfide | 0 ppm only | No current federal drinking-water standard; 0 mg/L preferred for odor |
| Total Alkalinity | 40 to 180 ppm | No current federal drinking-water standard |
| Carbonate | 40 to 120 ppm | No current federal drinking-water standard |
| pH | pH 6.4 to 8.2 | 6.5–8.5 |
| Nitrate | 0 to 10 ppm as N | 10 mg/L as N |
| Nitrite | 0 to 1 ppm as N | 1 mg/L as N |
| Tin | No OK bracket | No current federal drinking-water standard |
| Nickel | No OK bracket | No current federal drinking-water standard |
| Sulfate | 0 to 250 ppm | 250 mg/L |
| Aluminum | 0 ppm only | 0.05–0.2 mg/L |
| Chromium (Total) | 0 ppm only | 0.1 mg/L |
| E. coli & total coliform | Two colors: blue-violet, yellow / clear | Negative / absent |
The charts use ppm (and ppb for lead); the reference guide uses mg/L. In water, 1 ppm is about 1 mg/L, and 0.010 mg/L is 10 ppb.
A 0 match, and the first blocks.
Most rows start at a 0 block. Matching it means the pad looked closest to that block; it does not prove the substance is absent.
For several rows, the first block above 0 is higher than the EPA value in the kit’s reference guide, so the strip cannot show those lower levels: Lead (20 ppb against a 10 ppb Action Level), Iron (5 ppm against 0.3 mg/L), Manganese (0.1 ppm against 0.05 mg/L), Fluoride (10 ppm against 4.0 mg/L), Aluminum (10 ppm against 0.05–0.2 mg/L) and Chromium (0.5 ppm against 0.1 mg/L). If any of these matter to you, a certified lab test can measure them.
Reading the bacteria jar.
Wash your hands, fill the jar to the shoulder with your water sample, cap it tightly and shake it for 20 seconds. Place it upright at 68–90 °F (20–32 °C) and wait 48 hours, then look at the final color in the closed jar.
- Blue-violet: “Target bacteria not detected.”
- Yellow / clear: “Possible coliform / E. coli indicator bacteria detected.”
Do not open the jar after incubation; dispose of it after use. The jar gives one combined indicator result, and the user guide says a positive result suggests possible coliform contamination: retest with a fresh water sample, and if contamination is suspected, avoid drinking the water until it is evaluated. Confirm with a state-certified laboratory.

What can affect a reading?
The user guide notes that a strip may not match the chart if it is compared upside down, in poor lighting or after too much time has passed. Read in natural light, at each label’s time, with the 16-in-1 strip handle-up.
Storage matters too. Use the strips before the expiry date on the outer box and within 6 months of opening a pouch. After opening a 16-in-1 pouch, move the remaining strips into the bottle and recap it tightly; keep the desiccant in the bottle, and store unopened pouches, the bottle and the jars in a cool, dry place.
Screen colors, including on this website, are not a reference for reading a sample. Use the charts printed on the labels in your kit.
Turn a reading into a useful next step.
Write down the date, the water source and each block you matched. The kit’s record log has a row for every parameter and its EPA reference, so you can compare the same source over time.
Retest when a reading surprises you. For screening only: confirm concerning results with a certified lab. For lead, nitrate, nitrite, a bacteria result, or any reading at or above an EPA value in the reference guide, contact your water utility, or your local health department if you use a private well.
The box puts it plainly: results do not guarantee water safety or quality. If results are abnormal or you have concerns, consider confirmatory lab testing or contact your local water authority.
Sources & further reading
- Palinoia Water Quality Reference Guide, page 1 (printed in the kit)
- Palinoia Water Quality Reference Guide, page 2: Know your 24 water parameters
- The 16-row color chart on the strip bottle’s label
- EPA: National Primary Drinking Water Regulations
- EPA: Secondary Drinking Water Standards: Guidance for Nuisance Chemicals
- EPA: Basic information about your drinking water
- EPA: Protect your home’s water (private wells)
General information is educational. These tests are for screening only; confirm concerning results with a certified lab.
